Suzuki Jimny Front Brake Caliper Repair Rebuild Kit 51mm (1998 - 2018)
- Stok Durumu: Stokta Var
- Marka: Ithal
- Stok Kodu: KRC4689
Bu Ürünü Sevdiklerinize Önerebilirsiniz
Suzuki Jimny Front Brake Caliper Repair Rebuild Kit 51mm (1998 - 2018)
Engineered specifically for the legendary Suzuki Jimny (1998 - 2018 / 3rd Generation JB43 - JB23 Chassis) 4x4 off-road series, this premium 51mm Front Brake Caliper Repair Kit is designed to eliminate hydraulic fluid leaks, resolve caliper seizing, and overhaul sticking front brake piston mechanisms.
Composed of high-grade, heavy-duty rubber seals and protective dust boots, this rebuild kit restores tight hydraulic pressure during harsh driving cycles, resolves spongy brake pedal issues, and ensures your front braking system operates with factory-spec efficiency.
Why Should You Rebuild Your Jimny Front Brake Calipers?
Due to frequent off-road use, trail driving, and exposure to water crossings, mud, sand, and grit, the front brake calipers on the Suzuki Jimny undergo intense environmental and mechanical stress. Over time, the protective piston dust boots can get torn or degraded. This allows moisture and muddy debris inside the housing, causing the 51mm front caliper piston to rust, seize up, and drag against the brake rotor.
Common symptoms of a failing front caliper seal include:
The vehicle pulling to one side during braking or cruising due to an uneven front caliper stick.
Excessive wheel and rim heat, accompanied by power drag and decreased fuel economy as the brake remains partially applied.
Visible brake fluid leaks around the front caliper assembly and dropping fluid reservoir levels.
Excessive brake dust, burning odors, and uneven or premature wear on the front brake pads.
This 51mm piston diameter seal kit allows you to completely rebuild your existing assembly, bypassing the extreme cost of purchasing a completely new 4x4 front caliper housing.
Key Product Features:
Precise 51mm Fitment: Designed as an exact direct match for 3rd Gen Suzuki Jimny front disc brake calipers.
Premium Off-Road Elastomers: Superior resilience against mud, water immersion, heavy brake fluids (DOT 3 / DOT 4), and high thermal cycles.
Comprehensive Front Component Set: Includes high-quality piston dust boots, internal hydraulic pressure seals, and guide pin boots for a full service.
Cost-Effective Engineering: Restores maximum braking safety efficiently without discarding the expensive original caliper body.
Vehicle Compatibility & Technical Specifications
Specifications & Rebuild Data Table
| Specification | Details / Values |
| Product Name | Front Brake Caliper Rebuild Kit (Seals & Boots Set) |
| Piston Diameter | 51 mm |
| Compatible Vehicle | Suzuki Jimny (3rd Gen - JB43 / JB23 / JB33 Platform) |
| Model Years | 1998 - 2018 |
| Placement on Vehicle | Front Axle (Fits both Left and Right sides) |
| Engine Configurations | 1.3 16V (G13BB / M13A), 1.5 DDiS (Diesel) (Fits All 3rd Gen Models) |
Installation Tip: Because front axle braking performance is critical for off-road reliability and safety, always apply a thin layer of specialized high-temperature brake cylinder assembly paste to the new rubber seals and the piston to prevent tearing during insertion. Perform a complete brake system bleed afterward.