Mazda 6 Front Brake Caliper Guide Pin Kit (2007 - 2013)
- Stok Durumu: Stokta Var
- Marka: Ithal
- Stok Kodu: KRC7053C
Bu Ürünü Sevdiklerinize Önerebilirsiniz
Mazda 6 Front Brake Caliper Guide Pin Kit (2007 - 2013)
Engineered to restore smooth movement and precise braking performance on front disc brake systems for Mazda 6 (2007 - 2013 / GH Chassis) vehicles, this Front Brake Caliper Guide Pin Kit is manufactured to strict OEM specifications.
Worn, corroded, or seized slider pins cause uneven brake pad wear, persistent brake dragging, excessive heat buildup, and annoying rattling noises from the front suspension. Replacing your guide pins restores free slider movement and optimizes braking safety.
Why Is Mazda 6 Caliper Pin Replacement Important?
Caliper guide pins allow the floating caliper to slide smoothly back and forth, distributing equal clamping force across both brake pads. Over time, exposure to moisture, road salt, extreme brake temperatures, and dried grease causes the pins to corrode or stick inside the carrier bracket. Sticking slider pins prevent the pads from retracting away from the rotor, leading to dangerous brake drag and premature wear.
Symptoms of Worn or Seized Caliper Guide Pins
Rattling Noise Over Bumps: Excessive play between the guide pins and carrier bushings causing metallic clattering while driving over uneven roads.
Brake Drag & Overheating: The caliper fails to release after braking, causing constant friction, hot wheels, and burning odours.
Uneven Pad and Rotor Wear: One side of the brake pad wears down significantly faster than the other.
Vehicle Pulling Under Braking: Unequal braking pressure between the left and right front wheels causing steering instability.
Cost-Effective Solution: Rebuilding the sliding mechanism with new precision pins and protective rubber boots resolves caliper noise and sticking without needing expensive complete caliper replacements.
Key Product Features
Precision Fitment: 100% compatible with front disc brake calipers on 2007 - 2013 Mazda 6 GH chassis models.
Hardened Steel Construction: Heat-treated steel alloy for high tensile strength, anti-corrosion, and resistance to thermal expansion.
Protective EPDM Rubber Boots: Premium dust seals that prevent dirt/water ingress while retaining high-temperature grease.
Technical Specifications
| Feature | Detail / Value |
| Product Name | Front Brake Caliper Guide Pin & Slider Boot Kit |
| Compatible Vehicle | Mazda 6 (2007 - 2013 / GH Chassis - 1.8, 2.0, 2.5 Petrol & 2.0, 2.2 MZR-CD Diesel etc.) |
| Model Years | 2007, 2008, 2009, 2010, 2011, 2012, 2013 |
| Fitting Position | Front Axle (Suitable for both Right and Left sides) |